Logstash

Installation

You can install logstash either manually or as an APT-GET package. I recommend you to use the manual installation because the automatic one will chroot you in /var/log. If your application is using logs that are somewhere else, then you'll be screwed.

Manual installation (recommended)

Be careful: Logstash version must match the ElasticSearch version for better performances.

• Get Logstash from the official website: http://logstash.net/
• Install it and unpack it into /opt/

cd /tmp
wget https://download.elasticsearch.org/logstash/logstash/logstash-1.4.2.tar.gz
tar xjvf logstash-1.4.2.tar.gz
rm logstash-1.4.2.tar.gz
mv logstash-1.4.2/ /opt/
cd /opt
ln -s /opt/logstash-1.4.2 /opt/logstash

• Create configuration directories

mkdir -p /etc/logstash/conf.d
mkdir /etc/logstash/grok
chmod -R 777 /etc/logstash

• touch log file

touch /var/log/logstash.log
chmod -R 777 /var/log/logstash.log

• Create an init.d script

cd /etc/init.d
vim logstash.sh

Parse the following content:

#!/bin/sh
### BEGIN INIT INFO
# Provides: logstash
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start daemon at boot time
# Description: Enable service provided by daemon.
### END INIT INFO

. /lib/lsb/init-functions

if [ $(id -u) -ne 0 ]; then
	echo -e " " 
	echo -e "!!!!!!!!!!!!!!!!!!!!" 
	echo -e "!! Security alert !!" 
	echo -e "!!!!!!!!!!!!!!!!!!!!" 
	echo -e "You need to be root or have root privileges to run this script!\n\n"
	echo -e " " 
	exit 1
fi


name="logstash"
logstash_bin="/opt/logstash/bin/logstash"
logstash_conf="/etc/logstash/conf.d/"
logstash_log="/var/log/logstash.log"
pid_file="/var/run/$name.pid"

start () {
	commandOpts="agent -f $logstash_conf --log ${logstash_log} --verbose"
	log_daemon_msg "Starting $name" "$name"
	if start-stop-daemon --start --quiet --oknodo --pidfile "$pid_file" -b -m --exec $logstash_bin -- $commandOpts; then
		log_end_msg 0
	else
		log_end_msg 1
	fi
}
testConfig () {
	echo "#############################"
	echo " Logstash configuration test"
	echo "#############################"
	command="${logstash_bin} -f $logstash_conf --verbose -t"
	$command
}
stop () {
	log_daemon_msg "Stopping $name" "$name"
	start-stop-daemon --stop --quiet --oknodo --pidfile "$pid_file"
}
status () {
	status_of_proc -p $pid_file "" "$name"
}

case $1 in
	start)
		if status; then exit 0; fi
		start
		;;
	stop)
		stop
		;;
	reload)
		stop
		start
		;;
	restart)
		stop
		start
		;;
	status)
		status && exit 0 || exit $?
		;;
	testConfig)
		testConfig
		;;
	*)
		echo "Usage: $0 {start|stop|restart|reload|status|testConfig}"
		exit 1
		;;
esac
exit 0

• Create symlinks

ln -s /etc/init.d/logstash.sh /usr/bin/logstash

• Register application as a service (optional)

cd /etc/init.d
update-rc.d logstash.sh defaults

Automatic installation

Source: http://logstash.net/docs/latest/repositories

• Add Logstash repository: see Sources#ELK
• Install application

apt-get install logstash logstash-contrib

>> Binaries in /opt/logstash

>> Configuration in /etc/logstash/conf.d/

>> Logs in /var/log/logstash/

Configuration

GROK

Grok is used to split a log message into fields.

Grok tools

You can create your own grok patterns and test them with the on-line processor over here: http://grokdebug.herokuapp.com/

Apache2 error

Create configuration file:

vim /etc/logstash/grok/apache2ErrorLog.grok

Put the following content:

HTTPERRORDATE %{DAY} %{MONTH} %{MONTHDAY} %{TIME} %{YEAR}
APACHEERRORLOG \[%{HTTPERRORDATE:timestamp}\] \[%{WORD:severity}\] \[client %{IPORHOST:clientip}\] %{GREEDYDATA:message_remainder}

IpTables

Create configuration file:

vim /etc/logstash/grok/iptables.grok

Put the following content:

NETFILTERMAC %{COMMONMAC:dst_mac}:%{COMMONMAC:src_mac}:%{ETHTYPE:ethtype}
ETHTYPE (?:(?:[A-Fa-f0-9]{2}):(?:[A-Fa-f0-9]{2}))
# IPv6 + v4
IPTABLES %{SYSLOGTIMESTAMP:timestamp} %{HOSTNAME} .* IN=(%{WORD:in_device})? OUT=(%{WORD:out_device})? *(MAC=%{NETFILTERMAC})? \ 
SRC=%{IP:src_ip} DST=%{IP:dst_ip} *(LEN=%{INT:pkt_length})? *(TOS=%{BASE16NUM:pkt_tos})? *(PREC=%{BASE16NUM:pkt_prec})? \ 
*(TTL=%{INT:pkt_ttl})? ID=%{INT:pkt_id} .* *(PROTO=%{WORD:protocol}) SPT=%{INT:src_port} DPT=%{INT:dst_port} \
*(WINDOW=%{INT:pkt_window})? *(RES=%{BASE16NUM:pkt_res})? .* *(URGP=%{INT:pkt_urgp})?
# IPv4 only
IPTABLES_V4 %{SYSLOGTIMESTAMP:timestamp} %{HOSTNAME} .* IN=(%{WORD:in_device})? OUT=(%{WORD:out_device})? *(MAC=%{NETFILTERMAC})? \
SRC=%{IPV4:src_ip} DST=%{IPV4:dst_ip} *(LEN=%{INT:pkt_length})? *(TOS=%{BASE16NUM:pkt_tos})? *(PREC=%{BASE16NUM:pkt_prec})? \
*(TTL=%{INT:pkt_ttl})? ID=%{INT:pkt_id} .* *(PROTO=%{WORD:protocol}) SPT=%{INT:src_port} DPT=%{INT:dst_port} \
*(WINDOW=%{INT:pkt_window})? *(RES=%{BASE16NUM:pkt_res})? .* *(URGP=%{INT:pkt_urgp})?

Fail2ban

Create configuration file:

vim /etc/logstash/grok/fail2ban.grok

Put the following content:

FAIL2BAN %{TIMESTAMP_ISO8601:timestamp} %{JAVACLASS:criteria}: %{LOGLEVEL:level} \[%{WORD:service}\] Ban %{IPV4:clientip}

Logstash

More informations about GeoIP: http://logstash.net/docs/latest/filters/geoip

Apache2

Requirements:

• Make sure your logs are in "/var/log/apache2" or adjust the paths
• Make sure your using the COMBINED logs (default in Apache 2.4+)

Logstash configuration extract:

input {
	file {
	    path => [ "/var/log/apache2/access.log", "/var/log/apache2/other_vhosts_access.log" ]
	    type => "apache-access"
	}
	file {
	    path => "/var/log/apache2/error.log"
	    type => "apache-error"
	}
}

filter {
	# ------------------------ Parse services logs into fields ---------------------------
	# APACHE 2
	if [type] == "apache-access" {
		# To process log data (message's content) using some regex or precompiled GROK pattern
		grok {
			match => [ "message", "%{COMBINEDAPACHELOG}"]
		}
		# To extract log's time according to a date pattern
		date {
			match => [ "timestamp", "dd/MMM/YYYY:HH:mm:ss Z"]
		}
		# Extraction browser information, if available.
		if [agent] != "" {
			useragent {
				source => "agent"
			}
		}
		if [clientip] != "" {
			geoip {
				source => "clientip"
			}
		}
	}

	if [type] == "apache-error" {
		grok {
			match => [ "message", "%{APACHEERRORLOG}"]
			# Directory where to find the custom patterns
			patterns_dir => ["/etc/logstash/grok"]
		}
                if [clientip] != "" {
			geoip {
				source => "clientip"
			}
		}	
	}
}

output { 
   ...
}

IpTables

Requirements:

• Make sure you are logging dropped packets into a dedicated file. See Firewall log dropped

Logstash configuration extract:

input {
	file {
	    path => "/var/log/iptables.log"
	    type => "iptables"
	}
}


filter {
	# IPTABLES
	if [type] == "iptables" {
		grok {
			match => ["message", "%{IPTABLES}"]
			patterns_dir => ["/etc/logstash/grok"]
		}
                # Default 'geoip' == src_ip. That means it's easy to display the DROPPED INPUT :)
                if [src_ip] != "" {
			geoip {
			        source => "src_ip"
			}
		}
                if [dst_ip] != "" {
			geoip {
			        source => "dst_ip"
			        target => "dst_geoip"
			}
		}	
	}
}

output { 
   ...
}

Fail2ban

Logstash configuration extract:

input {
	file {
	    path => "/var/log/fail2ban.log"
	    type => "fail2ban"
	}
}


filter {
	# Fail2ban
	if [type] == "fail2ban" {
		grok {
			match => ["message", "%{FAIL2BAN}"]
			patterns_dir => ["/etc/logstash/grok"]
		}
                if [ban_ip] != "" {
			geoip {
			        source => "ban_ip"
			}
		}	
	}
}

output { 
   ...
}

Syslog

Logstash configuration extract:

input {
	file {
	    path => [ "/var/log/syslog", "/var/log/auth.log", "/var/log/mail.info" ]
	    type => "syslog"
	}
}


filter {
	# SYSLOG
	if [type] == "syslog" {
		grok {
			match => ["message", "%{SYSLOGBASE}"]
		}
	}
}

output { 
   ...
}

Edit the configuration file:

vim /etc/logstash/conf.d/logstash.conf

Check your configuration:

cd /opt/logstash/bin
./logstash -f /etc/logstash/conf.d/ -t --verbose

Apache2 logs

To process your Apache2 logs you can use the following configuration. That comes from the official ElasticSearch webinar:

vim /etc/logstash/conf.d/apache2_logs.conf

Put the following content

## List of complete inputs | filters | output available on the official website: 
## http://logstash.net/docs/latest/index

## Configuration syntax: http://logstash.net/docs/latest/configuration


###### Data sources to process #####
input {
	file {
		path => "/var/log/apache2/combined_log"
		type => "apache"
	} 
	file {
	    path => "/var/log/messages"
	    type => "syslog"
	}
}


filter {
	# REMINDER: you can check on Kibana the field name to use for each filter.

	if [type] == "apache" {
		# To process log data (message's content) using some regex
		grok {
			match => [ "message", "%{}"]
		}
		# To extract log's time according to a date pattern
		date {
			match => [ "timestamp", "dd/MMM/YYYY:HH:mm:ss Z"]
		}
		# Extraction browser information, if available.
		if [agent] != "" {
			useragent {
				source => "agent"
			}
		}
		if [clientip] != "" {}
			geoip {
				source => "clientip"
			}
		}
	}
	
}

output {
	elasticsearch {
		cluster => "clusterName"
		node => "logstash_agent_name"
	}
}

Application logs

To be done: LOG4J logs

Start Logstash

service logstash start 

## OR ##
/etc/init.d/logstash start

References

• Very good webinar from the ElasticSearch team: http://www.elasticsearch.org/webinars/introduction-to-logstash/?watch=1

https://home.regit.org/2014/01/a-bit-of-logstash-cooking/

mkdir -p /usr/share/logstash/grok vim /usr/share/logstash/grok/apacheErrorLog

HTTPERRORDATE %{DAY} %{MONTH} %{MONTHDAY} %{TIME} %{YEAR} APACHEERRORLOG \[%{HTTPERRORDATE:timestamp}\] \[%{WORD:severity}\] \[client %{IPORHOST:clientip}\] %{GREEDYDATA:message_remainder}

/opt/logstash/bin/logstash agent -f /etc/logstash/conf.d/ --verbose