Diskless netboot

Diskless server / workstation using netboot

NFS is a technology that allow you to share some files and folders over the network. So:

• All the clients will share the installation, configuration files and so on.
• Each client will run a dedicated instance of the operating system
• Logs will be centralized on the common NFS server - so we don't loose data on each reboot.

You must have a working DHCP server + NetBoot before starting this part.

Requirements:

• DHCP server
• NetBoot server

Optional:

• DNS server

Aim

In order to be super effective:

• Each client distribution will have its own kernel support (vmlinuz + initrd.img files)
• All the distributions will be under the same root
• Both NFS and TFTP will share the same root folder
• The user will be able to choose the O.S to use using a PXE menu

Target folder tree:

# TFTP root
/tftpboot/                                 

# Ubuntu installation NetBoot disk
/tftpboot/rescue/                          

###############
# Network bootable image(s) using NFS technology
################       

#### Boot file            
/tftpboot/pxelinux.0                   # Initial boot file - only use to load the PXE NetBoot manager
/tftpboot/{menu.c32 || vesamenu.c32}   # PXE interactive menu managers (text or graphical)
/tftpboot/pxelinux.cfg/                # PXE configuration(s)
/tftpboot/pxelinux.cfg/default         # default PXE configuration

#### Kernel file

/tftpboot/images/      

# Debian 7.x [Wheezy] 
/tftpboot/images/wheezy/   
/tftpboot/images/wheezy/vmlinuz
/tftpboot/images/wheezy/initrd.img

# Ubuntu 14.04 [Trusty] 
/tftpboot/images/trusty/  
/tftpboot/images/trusty/vmlinuz
/tftpboot/images/trusty/initrd.img


#### NFS 
# This is where the runnable will be. Each image will be in a dedicated folder.
/nfs/                    

# Debian 7.x [Wheezy] 
/nfs/wheezy/   

# Ubuntu 14.04 [Trusty] 
/nfs/trusty/

Installation

NFS support

apt-get install nfs-kernel-server nfs-common

Debootstrap (manage netboot image)

apt-get install debootstrap

Initramfs (to manage "virtual disks")

apt-get install initramfs-tools

Preparation

You have to create a dedicated folder on your server where you will host the client image.

mkdir -p /tftpboot/pxelinux.cfg
chmod -R 777 /tftpboot/pxelinux.cfg

mkdir -p /tftpboot/images
chmod -R 777 /tftpboot/images

The pxelinux.cfg/ folder is mandatory. Inside you can provide:

• configuration for a specific IP @ or hostname
• configuration for a group
• default configuration (required)

Boot menu and Kernel setup

The first thing to do is to setup a booting kernel. To do so we'll use the "syslinux" files.

Root file: pxelinux.0

The pxelinux.0 is the root file. That's the file that allows the netboot.

This is the file that is serve by the TFTP server.

cp /usr/lib/syslinux/pxelinux.0 /tftpboot/

Create NetBoot menu | defaults

Now, we have to specify which kernel to use and which distributions are available for NetBoot.

Create the default configuration file:

vim /tftpboot/pxelinux.cfg/default

Put the following:

# Debian 7.x
LABEL wheezy
    kernel images/wheezy/vmlinuz
    initrd images/wheezy/initrd.img

# Ubuntu 14.04
LABEL trusty
    kernel images/trusty/vmlinuz
    initrd images/trusty/initrd.img


# Prompt user for selection
PROMPT 1
# No timeout
TIMEOUT 0

• Each LABEL is a specific configuration that will displayed on the NetBoot menu.
• PROMPT 0 = enable user prompt so you can choose the configuration
• TIMEOUT 0 = timeout (in seconds) before the default option is chosen. 0 == no timeout

Note that I used a reference to "trusty/", that's a folder I need to create later on.

Init Kernel files

Create the target kernel folders. You should create 1 folder for each distribution you'd like to provide in NetBoot.

# Debian 7.x
mkdir -p /tftpboot/images/wheezy

# Ubuntu 14.04
mkdir -p /tftpboot/images/trusty

You have to copy your current kernel files to the boot folder:

# Debian 7.x
cp /boot/vmlinuz-3.13.0-24-generic /tftpboot/images/wheezy/vmlinuz
cp /boot/initrd.img-3.13.0-24-generic /tftpboot/images/wheezy/initrd.img

# Ubuntu 14.04
cp /boot/vmlinuz-3.13.0-24-generic /tftpboot/images/trusty/vmlinuz
cp /boot/initrd.img-3.13.0-24-generic /tftpboot/images/trusty/initrd.img

Notes:

• Do NOT use some symlink for "vmlinuz" and "initrd.img" !! It won't work.

• Adjust the values to your kernel number + target architecture

NFS server setup

Configuration

The NFS configuration is done in the /etc/exports file

vim /etc/exports

Add something like that:

  /nfs     192.168.2.0/24(ro,no_root_squash,no_subtree_check,async,insecure)

Adjust "192.168.2.0/24" to your own network address

• rw : Allow clients to read as well as write access
• ro : Read only access
• insecure : Tells the NFS server to use unpriveledged ports (ports > 1024).
• no_subtree_check : If the entire volume (/users) is exported, disabling this check will speed up transfers.
• async : async will speed up transfers.
• no_root_squash: This phrase allows root to connect to the designated directory.

- NOTE -

It's always a good idea to use Read-Only if you plan to share this disk.

That will avoid user to mess with your image!

Security

Like TFTP, this part is insecure !

You must restrict the access to your NFS server by a firewall script and filtering BEFORE reaching the LAN !

NFS is using dynamic ports numbers because it runs over rpcbind. Making NFS using specifics port is a pain in the ass !! :(

So, instead of that you should allow your LAN communication.

    IPTABLES=`which iptables`
    LAN_ADDRESS="192.168.2.0/24"

    # Allow LAN communication
    $IPTABLES -A INPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT
    $IPTABLES -A OUTPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT

Management

service nfs-kernel-server {status|start|stop|restart}

Test the server

Install the NFS v4 client:

apt-get install nfs-common

To mount the default path:

mount -t nfs nfs-server:/ /mnt

You'll see: "/nfs"

It's better to do:

mount -t nfs nfs-server:/nfs /mnt

NFS client image

There are different way to setup a NFS client image.

The main ones are:

• debootstrap

• copying the install from your server

• Manual install on a client, then, when the system is ready, copy everything to the NFS share

Setup client distribution

Setup distribution folder

You have to create one target for each distribution you want to serve:

mkdir -p /nfs/trusty
mkdir -p /nfs/wheezy

- NOTES -

• The folder name should match your NetBoot settings. Folder name = a LABEL in the NetBoot config.

• The folder name should match a Linux (Debian like) distribution name

Populate the content

Debian 7.x

cd /nfs/wheezy
debootstrap wheezy /nfs/wheezy

Ubuntu 14.04

cd /nfs/trusty
debootstrap trusty /nfs/trusty

Configure client distribution

• Manual configuration: Diskless image configuration - manual setup

• Automatic [Puppet || Chef] configuration: Diskless image configuration - script setup

Backup distribution

You can create an archive of your current distribution for later restore / re-use.

Compression

cd /nfs
tar cvpjf trusty.tar.bz2 ./trusty

Restoration

cd /nfs
tar -xvjf trusty.tar.bz2

Custom NetBoot configuration

Basic menu

See the previous § to learn how to setup a super simple boot menu without any interaction.

Text menu

The text menu required a new file: menu.c32

cp /usr/lib/syslinux/menu.c32 /tftpboot/pxelinux.cfg/

Graphic menu

The graphic menu required a new file: vesamenu.c32

cp /usr/lib/syslinux/vesamenu.c32 /tftpboot/pxelinux.cfg/

Then you can add an image file to display as menu background.

Remember:

• You'll have to specify the exact size of the picture later on - so note the picture size !! Recommendation: 640x480
• Remember that the SysLinux cannot display more than depth=16 and 65536 colors

ImageMagic command to convert a picture:

convert -depth 16 -colors 65536 my_custom_image.png splash.png

Then copy the splash:

cp splash.png /tftpboot/pxelinux.cfg/

Configure / setup menu content

Edit the PXE NetBoot file:

vim /tftpboot/pxelinux.cfg/default

Put:

#### GENERIC OPTIONS #####
# Enable text menu
#DEFAULT menu.c32
# Enable graphical menu
DEFAULT vesamenu.c32
# Prompt for user input? (0 = choose from menu, 1 = you can type anything)
PROMPT 0
# Allow or not the user to left the menu (1 = user is locked to the menu)
NOESCAPE 1
# Time before using default option
TIMEOUT 50


#### Menu settings #####
MENU TITLE my super netboot menu
# Setup background image (the resolution is $WIDTH $HEIGHT and must match the given picture)
MENU RESOLUTION 640 480
MENU BACKGROUND pxelinux.cfg/splash.png
# Setup text properties
MENU WIDTH 80
MENU ROWS 14
MENU MARGIN 10


#### Distributions #####
# Debian wheezy
LABEL wheezy
    MENU LABEL Debian 7.x [wheezy]
    MENU DEFAULT
    # Kernel and boot files
    KERNEL images/wheezy/vmlinuz 
    APPEND boot=nfs root=/nfs/wheezy initrd=images/wheezy/initrd.img nfsroot=192.168.2.2:/nfs/wheezy

# Ubuntu 14.04
LABEL trusty
    MENU LABEL Ubuntu 14.04 [trusty]
    # Kernel and boot files
    KERNEL images/trusty/vmlinuz
    APPEND boot=nfs root=/nfs/trusty initrd=images/trusty/initrd.img nfsroot=192.168.2.2:/nfs/trusty

Note all the "MENU" commands + PROMPT 0

More about the menu configuration: http://www.syslinux.org/doc/menu.txt

Security notes

in order to work you must adjust the rights of your "/var/lib/tftpboot/".

chmod 777 /pxe-boot/*
chmod 777 /pxe-boot/pxelinux.cfg/*

DHCP note

Don't forget to adjust your DHCP configuration if you plan to serve a specific file for a client!

vim /etc/dhcp/dhcp.conf

References

Ubuntu diskless how-to: https://help.ubuntu.com/community/DisklessUbuntuHowto Super video tutorials:

• https://www.youtube.com/watch?v=js9imsrqAMk
• http://www.stepladder-it.com/bivblog/14/ to /16/
• https://blog.dlasley.net/2013/01/pxe-server-ubuntu/