Diskless netboot

Revision as of 16:47, 3 June 2014 by WikiFreak (talk | contribs)

Diskless server / workstation using netboot


NFS is a technology that allow you to share some files and folders over the network. So:

  • All the clients will share the installation, configuration files and so on.
  • Each client will run a dedicated instance of the operating system
  • Logs will be centralized on the common NFS server - so we don't loose data on each reboot.

You must have a working DHCP server + NetBoot before starting this part.


Requirements:


Optional:


Aim

In order to be super effective:

  • Each client distribution will have its own kernel support (vmlinuz + initrd.img files)
  • All the distributions will be under the same root
  • Both NFS and TFTP will share the same root folder
  • The user will be able to choose the O.S to use using a PXE menu


Target folder tree: 

# TFTP root
/tftpboot/                                 

# Ubuntu installation NetBoot disk
/tftpboot/rescue/                          

###############
# Network bootable image(s) using NFS technology
################
/tftpboot/nfs/             

#### Boot file            
/tftpboot/nfs/pxelinux.0                   # Initial boot file - only use to load the PXE NetBoot manager
/tftpboot/nfs/{menu.c32 || vesamenu.c32}   # PXE interactive menu managers (text or graphical)
/tftpboot/nfs/pxelinux.cfg/                # PXE configuration(s)
/tftpboot/nfs/pxelinux.cfg/default         # default PXE configuration

#### Kernel file
/tftpboot/nfs/kernel/vmlinuz
/tftpboot/nfs/kernel/initrd.img

#### NFS 
# This is where the runnable will be. Each image will be in a dedicated folder.
/tftpboot/nfs/images/                    

# Debian 7.x [Wheezy] 
/tftpboot/nfs/images/wheezy/   

# Ubuntu 14.04 [Trusty] 
/tftpboot/nfs/images/trusty/



Installation

NFS support 

apt-get install nfs-kernel-server nfs-common

Debootstrap (manage netboot image) 

apt-get install debootstrap


Initramfs (to manage "virtual disks") 

apt-get install initramfs-tools



NFS server setup

Preparation

You have to create a dedicated folder on your server where you will host the client image. 

mkdir -p /tftpboot/nfs/pxelinux.cfg
mkdir -p /tftpboot/nfs/images
mkdir -p /tftpboot/nfs/kernel
chmod -R 777 /tftpboot/nfs


Configuration

The NFS configuration is done in the /etc/exports file 

vim /etc/exports


Add something like that: 

  /tftpboot/nfs     192.168.2.0/24(ro,no_root_squash,no_subtree_check,async,insecure)


Adjust "192.168.2.0/24" to your own network address

  • rw : Allow clients to read as well as write access
  • ro : Read only access
  • insecure : Tells the NFS server to use unpriveledged ports (ports > 1024).
  • no_subtree_check : If the entire volume (/users) is exported, disabling this check will speed up transfers.
  • async : async will speed up transfers.
  • no_root_squash: This phrase allows root to connect to the designated directory.


- NOTE -

It's always a good idea to use Read-Only if you plan to share this disk.

That will avoid user to mess with your image!


Security

Like TFTP, this part is insecure !

You must restrict the access to your NFS server by a firewall script and filtering BEFORE reaching the LAN !


NFS is using dynamic ports numbers because it runs over rpcbind. Making NFS using specifics port is a pain in the ass !! :(

So, instead of that you should allow your LAN communication. 


    IPTABLES=`which iptables`
    LAN_ADDRESS="192.168.2.0/24"

    # Allow LAN communication
    $IPTABLES -A INPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT
    $IPTABLES -A OUTPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT


Management

service nfs-kernel-server {status|start|stop|restart}


Test the server

Install the NFS v4 client: 

apt-get install nfs-common


To mount the default path: 

mount -t nfs nfs-server:/ /mnt

You'll see: "/mnt/tftpboot/nfs"


It's better to do: 

mount -t nfs nfs-server:/tftpboot/nfs /mnt



NFS client image

There are different way to setup a NFS client image.

The main ones are:

  • debootstrap
  • copying the install from your server
  • Manual install on a client, then, when the system is ready, copy everything to the NFS share


Setup client distribution

Setup distribution folder

You have to create one target for each distribution you want to serve: 

mkdir -p /tftpboot/nfs/images/trusty
mkdir -p /tftpboot/nfs/images/wheezy

- NOTES -

  • The folder name should match your NetBoot settings. Folder name = a LABEL in the NetBoot config.
  • The folder name should match a Linux (Debian like) distribution name


Populate the content

Debian 7.x 

cd /tftpboot/nfs/images/wheezy
debootstrap wheezy /tftpboot/nfs/images/wheezy


Ubuntu 14.04 

cd /tftpboot/nfs/images/trusty
debootstrap trusty /tftpboot/nfs/images/trusty


Configure client distribution


Backup distribution

You can create an archive of your current distribution for later restore / re-use.


Compression

cd /tftpboot/nfs/images
tar cvpjf trusty.tar.bz2 ./trusty


Restoration

cd /tftpboot/nfs/images
tar -xvjf trusty.tar.bz2



Adjust TFTP root

You must adjust the TFTP root to match the NFS root !! 

vim /etc/default/tftpd-hpa


Adjust the file like that: 

RUN_DAEMON="yes"
OPTIONS="--secure"
TFTP_ADDRESS="0.0.0.0:69"
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/tftpboot/nfs"


Notice the RUN_DAEMON instruction + the new TFTP_DIRECTORY


Custom NetBoot configuration

Basic configuration

You can setup your own netboot configuration.

To do so, you can re-use one of the syslinux templates: 

# Create folders
mkdir /tftpboot/nfs/pxelinux.cfg/

# Create configuration files
cp /usr/lib/syslinux/pxelinux.0 /pxe-boot/


The pxelinux.cfg folder is mandatory. Inside you can provide:

  • configuration for a specific IP @ or hostname
  • configuration for a group
  • default configuration (required)


Create the default configuration file: 

vim /pxe-boot/pxelinux.cfg/default


Put the following: 

# Ubuntu 14.04
LABEL TRUSTY
    kernel images/trusty/vmlinuz
    # Set NFS share as default root 
    append boot=nfs root=/dev/nfs initrd=images/trusty/initrd.img nfsroot=192.168.2.2:/pxe-boot/images/trusty

# Prompt user for selection
PROMPT 0

TIMEOUT 30
  • Each LABEL is a specific configuration that will displayed on the NetBoot menu.
  • PROMPT 1 = enable user prompt so you can choose the configuration
  • TIMEOUT 30 = timeout (in seconds) before the default option is choosen


Note that I used a reference to "trusty/", that's a folder I need to create later on.


Advanced menu

Install menu manager

Text menu: 

cp /usr/lib/syslinux/menu.c32 /pxe-boot/


Graphic menu: 

cp /usr/lib/syslinux/vesamenu.c32 /pxe-boot/
cp /mySuperPicture/logo.png /pxe-boot/pxelinux.cfg/

The associate picture must be a PNG 800x600 picture.


Configure boot options

Then edit the PXE boot file: 

vim /pxe-boot/pxelinux.cfg/default


Put: 

#### GENERIC OPTIONS #####
# Enable text menu
#DEFAULT menu.c32
# Enable graphical menu
DEFAULT vesamenu.c32
# Prompt for user input? (0 = choose from menu, 1 = you can type anything)
PROMPT 0
# Allow or not the user to left the menu (1 = user is locked to the menu)
NOESCAPE 1
# Time before using default option
TIMEOUT 50


#### Menu settings #####
MENU TITLE my super netboot menu
MENU BACKGROUND pxelinux.cfg/logo.png
MENU WIDTH 80
MENU ROWS 14
MENU MARGIN 10


#### Distributions #####
# Ubuntu 14.04
LABEL trusty
    MENU LABEL Ubuntu 14.04 (trusty)
    MENU DEFAULT
    # Kernel and boot files
    KERNEL images/trusty/vmlinuz
    ### Boot options
    # Set NFS share as default root 
    append boot=nfs root=/dev/nfs initrd=images/trusty/initrd.img nfsroot=192.168.2.2:/pxe-boot/images/trusty

# Debian wheezy
    MENU LABEL Debian Wheezy
    # Kernel and boot files
    KERNEL images/wheezy/vmlinuz
    append boot=nfs root=/dev/nfs initrd=images/wheezy/initrd.img nfsroot=192.168.2.2:/pxe-boot/images/wheezy


Note all the "MENU" commands + PROMPT 0


Security notes

in order to work you must adjust the rights of your "/var/lib/tftpboot/". 

chmod 777 /pxe-boot/*
chmod 777 /pxe-boot/pxelinux.cfg/*



DHCP note

Don't forget to adjust your DHCP configuration if you plan to serve a specific file for a client! 

vim /etc/dhcp/dhcp.conf



References

Ubuntu diskless how-to: https://help.ubuntu.com/community/DisklessUbuntuHowto Super video tutorials:

Retrieved from "http://www.daxiongmao.eu/wiki/index.php?title=Diskless_netboot&oldid=403"